Port Security Configuration; Using The Gui - TP-Link T1600G-52TS User Manual

Configuring Port Security
2

Port Security Configuration

2.1

Using the GUI

Choose the menu SECURITY > Port Security to load the following page.
Figure 2-1 Port Security
Follow these steps to configure Port Security:
1) Select one or more ports and configure the following parameters.
Port
Max Learned
Number of MAC
Current Learned
MAC
Exceed Max
Learned Trap
Displays the port number.
Specify the maximum number of MAC addresses that can be learned on the
port. When the learned MAC address number reaches the limit, the port will stop
learning. It ranges from 0 to 64. The default value is 64.
Displays the current number of MAC addresses that have been learned on the
port.
Enable Exceed Max Learned, and when the maximum number of learned MAC
addresses on the specified port is exceeded, a notification will be generated and
sent to the management host.
Port Security Configuration
User Guide 661