Troubleshooting - Electrolux EHF6140FOK User Manual

TROUBLESHOOTING

You cannot activate the
appliance or operate it.
The residual heat indicator
does not come on.
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the customer service. Give the data from
the rating plate, three digit letter code for
the glass ceramic (it is in the corner of the
glass surface) and an error message that
comes on.
Make sure, you operated the appliance
correctly. If not the servicing by a customer
service technician or dealer will not be free
of charge, also during the warranty period.
The instructions about the customer serv-
ice and conditions of guarantee are in the
guarantee booklet.
Problem Possible cause
Problem with the house
electrical system.
The cooking zone is not
hot because it operated
only for a short time.
ENGLISH
Remedy
Activate the appliance
again and set the heat set-
ting in less than 10 sec-
onds.
Examine the fuse in the
electrical system of the
house in the fuse box. If
the fuses blow again and
again, speak to qualified
electrician.
If the cooking zone oper-
ated sufficiently long to be
hot, speak to the service
centre.
9