Braun Skin i-expert PL7 Series Manual page 9

Make sure you avoid missed areas by placing the treatment window directly next to the previously treated
spot without leaving any space between treated areas.
Avoid overlapping treatment or treating the same area twice as this may increase the chance of producing
adverse reactions.
If you feel intense pain, stop treatment immediately and consult your physician before using the device again.
Treatment head(s)
The standard head (10) can be used on all areas.
The wide head (11) is efficient on large body areas.
The precision head (12) has been specifically designed for small, curvy, hard to reach areas.
In case your device comes with two precision heads, one of them is marked + .
This helps distinguishing the head used on the face from the one used on other body areas.
How to treat the face (females only)
• Before treating the face, make sure you have done a skin test. Remove any visible hair and cosmetics,
lotions and creams from the area you wish to treat.
• Before pressing the treatment button, close your eyes or look away to avoid the bright light.
Avoid treating the same area twice as this may increase the chance of producing adverse reactions.
• When treating the upper lip area, a void contact with the lips and the nostrils. The central area below
the nostrils might be sensitive.
• Do not use on permanent / semi-permanent lip liner on the lip margin.
• TIP: You can press your lips together to ensure that the light does not activate on the upper lip itself.
• Hair growth under the chin can be denser and coarser. This can sometimes lead to slight skin reddening
following a treatment. This redness is temporary and should completely disappear after 24 hours.
How to treat the pubic area (females only)
Bikini area Area between the legs
Before treating the pubic area, make sure you have done a skin test. Remove any visible hair, lotions or
creams from the area to be treated. You might want to confirm full hair removal using a mirror.
• Stand, sit or crouch down to reach all areas to be treated.
• For pubic area treatment, we recommend using the precision head (12) with the stamping method.
• Do not share your precision head (12) with others.
Select extra sensitive mode by pressing the mode button (4) until you only see one indicator light:
1. Place the treatment window firmly on your skin, ensuring both skin sensors have skin contact. Stretch
your skin with your fingers to improve skin contact.
2. The power bars (3) show white LEDs.
3. Press and instantly release the treatment button (5). The device will emit a flash.
4. Lift off the device and place it onto the next adjacent spot to be treated. Repeat steps 2 to 4 and
continue spot by spot until you have completed the entire area.
NOTE:
Since your skin might have a darker color or pigmentation in the pubic area, the device might not flash
even if it has good skin contact.
• If redness or a burning sensation occurs and lasts for several minutes, apply a cool cloth/pad to soothe
the area.
• If any pigment changes in the skin, e.g., lightening or darkening, are observed, stop using the device.
Seek medical advice to determine the cause which may be due to an underlying medical condition.
Area between
buttocks
9