Honda CIVIC Sedan 2022 Owner's Manual page 731

■
What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
* Not available on all models
uuIf the Battery Is DeaduJump Starting Procedure
1What to Do After the Engine Starts
The Vehicle Stability Assist TM (VSA®) system, Vehicle
Stability Assist TM (VSA®) OFF, Adaptive Cruise Control
(ACC) with Low Speed Follow * , safety support and low
tire pressure/ TPMS * indicators may come on in amber
along with a message in the gauge when you set the
power mode to ON after reconnecting the battery.
Drive a short distance at more than 12 mph (20 km/h).
Each indicator should go off. If any do not, have your
vehicle checked by a dealer.
729