Honda CIVIC Sedan 2022 Owner's Manual page 602

uuHonda Sensing®uRoad Departure Mitigation System
■
Road Departure Mitigation system On and Off
Models with A-type meter
Left Selector
Wheel
Safety Support Switch
Models with B-type meter
Safety Support Switch
*1 : Models with A-type meter
*2 : Models with B-type meter
* Not available on all models
600
When you turn the Road Departure Mitigation
system on and off, do the following.
1. Press the safety support switch.
Models with A-type meter
2. Roll the left selector wheel to the
symbol and push it.
Models with B-type meter
2. Roll the right selector wheel to the
symbol and push it.
u A message appears on the driver
information interface when the system
turns on or off.
u A check mark appears in the box and the
color of the
when the system is on. The check mark
Right
disappears and the color of the
Selector
Wheel
symbol changes to gray when the system
is off.
The Road Departure Mitigation system is in
the previously selected on (checked) or off
(unchecked) setting each time you start the
engine.
1Road Departure Mitigation system On and Off
symbol changes to green
You can also select safety support content from the
driver information interface.
2 Driver Information Interface P. 117
2 Driver Information Interface (Right Side
Area) P. 150
When you have selected Warning only
Only *2 from the customized options using the driver
information interface * or audio/information screen
the system does not operate the steering wheel.
2 Settings * P. 135
2 Customized Features P. 381
The Vehicle Stability Assist TM (VSA®) system, Vehicle
Stability Assist TM (VSA®) OFF, Adaptive Cruise Control
(ACC) with Low Speed Follow * /Adaptive Cruise
Control (ACC) * , low tire pressure/TPMS
support indicators may come on in amber along with
a message in the gauge when you set the power
mode to ON after reconnecting the battery.
Drive a short distance at more than 12 mph (20 km/h).
Each indicator should go off. If any do not, have your
vehicle checked by a dealer.
*1 /Warning
* ,
* and safety