Utax P-C3560i Operation Manual page 263

Setup and Registration (System Menu) > System Menu
Item
Service Status
Accounting Report
Sub Address Box List
FAX List (Index)
FAX List (No.)
Outgoing FAX Report
Incoming FAX Report
Optional Network Status
Admin Report Settings
[System Menu/Counter] key > [Report] > [Admin Report Settings]
Configure settings for fax functions.
FAX Operation Guide
Result Report Settings
[System Menu/Counter] key > [Report] > [Result Report Settings]
Item
Send Result Report
E-mail/Folder
*1
FAX
Canceled before
*2
Sending
*2
Recipient Format
*1
RX Result Report
Job Finish Notice Setting
*1 Only on products with the fax function installed.
*2 When "E-mail/Folder" and "FAX" are set to [Off], this function will not be displayed.
Prints the service status. More detailed information is available than on the Status Page.
Service personnel usually print the service status pages for maintenance purpose.
Prints the accounting report, allowing you to check the accounts that have been registered on
the machine.
Prints the report on the FAX function.
FAX Operation Guide
NOTE
FAX functions are available only on products with the fax function installed.
Prints the optional network status, allowing you to check the information including optional
network interface firmware version, network address and protocol.
NOTE
This function is displayed when the optional Network Interface Kit or Wireless Network
Interface Kit is installed.
Automatically print a report of transmission result when a transmission is complete.
Automatically print a report of transmission result when E-mail or SMB/FTP transmission is
complete.
Value: Off, On, Error Only
FAX Operation Guide
Print a send result report if the job is canceled before being sent.
Value: Off, On
Select the Recipient Format for the send result report.
Value: Name or Destination, Name and Destination
FAX Operation Guide
Attaches sent images to job finish notices.
Value: Do Not Attach Image, Attach Image
8-6
Description
Description