Step-By-Step Installation - Samsung RB46TS174SA User Manual

Step-by-step installation

STEP 1 Select a site
Site requirements:
• Solid, level surface without carpeting or flooring that may obstruct ventilation
• Away from direct sunlight
• Adequate room for opening and closing the door
• Away from a heat source
• Room for maintenance and servicing
• Temperature range: between 10 °C and 43 °C
Effective temperature range
The refrigerator is designed to operate normally in the temperature range specified by
its class rating.
Climate Class
Extended Temperate
Temperate
Subtropical
Tropical
NOTE
The cooling performence and power consumption of the refrigerator may be affected
by the ambient temperature,the door-openning frequency,and the location of the
refrigerator. We recommend adjusting the temperature settins as appropriate.
The bottom cabinet cover is the metal
The condenser of your fridge is placed at the
bottom of cabinet. As a result of that, assemble
the spacer by fixing it to holes on the cover
bottom panel and turn 90° that's shown below
figure for arranging the distance between
the refrigerator and the back wall at where
you place the fridge. You can move the fridge
towards the back wall until that point.
The distance between the appliance and back
wall must be a maximum of 75 mm.
Symbol
IEC 62552 (ISO 15502)
SN Between +10 and +32
N Between +16 and +32
ST Between +16 and +38
T Between +16 and +43
Ambient Temperature (
+10 and +32
+16 and +32
+18 and +38
+18 and +43
Plastic for distance setting
C)
o
ISO 8561
English 29