Garmin FORERUNNER 965 Nero Owner's Manual page 127

3 Select an option:
• To install Forerunner bands, align one side of the new band with the holes on the device, push in the
exposed watch pin, and press the band into place.
NOTE: Make sure the band is secure. The watch pin should align with the holes on the device.
• To install QuickFit 22 bands, remove the watch pin from the Forerunner band, replace the watch pin on the
device, and press the new band into place.
NOTE: Make sure the band is secure. The latch should close over the watch pin.
4 Repeat the steps to change the other band.
Device Information 119