Honda GL1800D Owner's Manual page 113

GL1800BD/D/DA
!a Check the parking brake (
brake indicator to come on).
!b Make sure the engine stop switch is in
the (Run) position.
(P55)
!c Unlock the steering.
!d Turn the ignition switch to ON.
N
u Make sure the indicator comes
N
on. If the indicator does not come
(P113)
on.
!e Press the start button with the throttle
completely closed.
parking
!f Make sure the parking brake lever is
released before riding.
(P49)
!c!d
!a
If the engine does not start:
!b
a ! Open the throttle fully and press the
start button once.
b ! Repeat the normal starting procedure.
! c If the engine starts, open the throttle
!a
slightly if idling is unstable.
! d If the engine does not start, wait 10
seconds before trying steps
again.
❙
If Engine Will Not Start
Quick Engine Starting
You can also start the engine by the
following procedure.
!a Make sure the status of the Honda
SMART Key is active
!e
the operating range.
!b While applying the brake lever or pedal
firmly, press and hold the start button
until engine starts.
u The steering lock is automatically
unlocked at the same time.
u
GL1800/B
will not operate if the transmission is
in gear. The quick engine starting can
be operated by pulling in the clutch
lever with the transmission in gear so
long as the side stand is raised.
When You Stop the Engine
! a To stop the engine, put the gear to
Neutral (
b ! Turn the ignition switch to OFF.
u
GL1800BD/D/DA
a ! & ! b
ignition switch to OFF when the
motorcycle in gear, the engine will
(P173)
shut off with the clutch disengaged.
! c
GL1800BD/D/DA
when you park the motorcycle.
(P56)
and enter
(P57)
The quick engine starting
N
indicator comes on).
If you turn the
Set the parking brake
(P60)
111