Time Settings - NEC Express5800/T71f User Manual

Time Settings

This screen provides the mechanism to configure the Network Time acquisition method. With
Administrator or Operator privilege level, you can modify configuration settings and click the Apply
Changes button to execute the settings, as well as click the Sync Time Now button (when in
Requested Mode) to request an immediate clock set.
Operation Mode
Configures the NTP Mode. You can Disable NTP, set Requested Mode, or Daemon Mode in this
parameter.
In Requested Mode, you can request an immediate clock synchronization with the NTP server;
request will be sent when click the Sync Time Now button.
The Daemon Mode runs NTP daemon which sends a NTP request at approximately 5 minute
intervals. Multiple NTP servers may be specified to provide redundancy.
Time Synchronization Method
Specifies the synchronization method for Requested Mode. Select Slew mode when you want to
adjust the time smoothly over time if there are time sensitive applications in place. Select Step
mode to aggressively change the time using settimeofday() system call
.
.
112