Using The Appliance; Cleaning The Appliance - Moulinex LM9245 Manual

USING THE APPLIANCE

Product become in stand-by after 10minutes of inactivity. You can reactive the product by touching Start/stop key. In
case of quick unplug and plug product, it can stay in stand-by mode.
PROGRAM MODE
Once the water and ingredients are in the bottom of the bowl or in the steam basket, lock the lid and place the bowl on
the motor unit (see Getting Started), then select the desired automatic program.
You can modify your settings by pressing on the timer
automatic program, press START/STOP (b3)
Introducing the suggested automatic programs
Creamy soup (thin texture)
Chunky Soup (texture dense)
Steam cooking with cooking basket
and 50 cl water *
When the program is finished, the appliance gives out 3 beeps.
Unlock the jug by pressing the trigger (d2) located on the inside of the handle (cf. Fig. 9) and serve immediately or leave
the jug in place to keep warm (up to 40 minutes).
Manual Mode
Introducing the suggested automatic programs
Blender Mode
Cooking Mode
Crushed Ice
BLENDER MODE (without cooking)
• Press MENU until you reach the BLENDER MODE
icon then select the mixing speed with the +/-
buttons.
• If you want to program the mixing time, press on
TIMER and set the time using the buttons +/-.
• Press on START/STOP for starting up the mixing.
• Once your preparation is mixed, press the release
button (d2) and remove the blender bowl.
COOKING MODE
• Press the MENU button until you reach the COOKING
MODE icon then select the temperature with the +
and – buttons.
• If you want to program the cooking time, press TIMER ,
and set the time using the +/- buttons.
• Press START/STOP to start cooking. The red indicator
light comes on to let you know that cooking has started.
. Next, adjust the time using the + and - (b5). To start the
Temperature (Max) Adjustable times
100°C 30 min. (+ or -10 min)
100°C 40 min. (+ or -10 min)
30 min. (+ or -20 min)
100°C
Temperature (Max) Adjustable times
0 - 3 min.
60°C - 100°C 0 - 59 min.
5 - 30 sec.
• At any time during the program, you can operate the
motor by pressing the + key.
- at slow speed (v1) to mix liquid foods (e.g. making
sauces)
- at high speed (from v2) for mixing
•
When you have finished cooking, press the release
button (d2) then remove the blender bowl
CRUSHED ICE MODE:
• Put 6 to 8 ice cubes in the bowl and close the lid.
• Put Press the MENU key until you reach the CRUSED
ICE icon .
• The default mixing time is set to 30s. If you want
to adjust this time, press TIMER and adjust it using
the +/- buttons
• Press START/STOP to start mixing
- Once your preparation is mixed, press the release
button (d2) then remove the blender bowl
14
14
PRACTICAL GUIDANCE
• Make sure you have enough liquid to cover the Min
limit marker (Cf. Fig. 7). and take care not to exceed
the MAX limit marker engraved inside the jug (Cf.
Fig. 8).
• Some recipes may cause sudden overflowing, due
to the formation of bubbles, particularly when using
frozen vegetables. In this case, it is up to you to
reduce the quantities accordingly.
• Time and temperature information is flashing:
you can modify this information. Adjust the time
Mixing
as required with the aid of the + (increase) and -
(decrease) buttons, depending on the ingredients
Max speed
used and the amount to be made (see table of the
1 min
cooking times for soups in the recipe booklet).
Min speed
• With the cooking basket (depending on model*)
13 secs
you can steam cook (use P3 with 0.5 litres of water),
or for chunky soup recipes and cooking whole
ingredients such as meat, fish, vegetables at the
same time as your soup (use P1 or P2).

CLEANING THE APPLIANCE

• Do not immerse the appliance in water. Never put
the motor unit (A) under hot running water.
Mixing
• Clean the jug immediately after use.
• Fill up the jug with 1 litre of hot water along with
V1 - V5
2 or 3 drops of washing up liquid Only use the
recommended amount of water and washing up
V1 - V5
liquid. An excess of washing up liquid creates more
foam and consequently can lead to overflowing.
Pulse
• Use the Autoclean automatic program:
wash the bowl.
• Once the program has stopped, unplug the
appliance.
• Press on the trigger (d2) then remove the blender
jug (D).
• Place the jug on a flat surface.
• Unlock the lid by turning it a quarter turn clockwise.
Remove the lid with care.
• When the lid is cool, remove the carrier seal. To do
so, grip it between your thumb and index finger, then
pull to extract it. The seal dismounts without risk of
deterioration (Cf. Fig. 12).
• Finish cleaning the jug with the aid of a sponge.
• At the end of the programs, the appliance
automatically keeps the recipe warm for 40 minutes
so it remains ready to be consumed. To stop
warming, simply press the OFF button.
• If you open the lid, press the trigger or remove the
jug, the warming process will automatically stop.
• When the program has started, you can stop the
appliance at any time by pressing the P button (2
beeps will sound). The program is then in pause
mode and you can restart it by pressing the P button
again or by pressing the OK button (a beep signal
will be emitted).
• If you choose the wrong program by mistake and
you wish to cancel it, press the OFF button for 2
seconds and that will allow you to restart the times
and the temperatures.
• Rinse the inside of the jug and the lid under running
water.
• In the event of the heated part of the jug getting
extremely dirty, leave to soak for a few hours in a mix
of water and washing up liquid to help get it clean.
• Take care when cleaning the blades
(d3) in the blender jug and when you
empty the bowl as they are sharp.
to pre-
9
• Use a damp cloth to clean the motor unit (A). Dry
it carefully.
• The detachable parts (lid, seal, measuring cap,
cooking basket) can be cleaned with a sponge and
hot soapy water.
• To preserve the appearance and service life of the
lid of your appliance, hand wash it. Do not use the
abrasive side of the sponge to avoid scratches.
• The removable blade is not dishwasher safe — wash
it under running water using a brush.
15
15