Samsung SCX-6322DN/XAZ Service Manual page 59

14. Remove four screws to release the Channel Base
Frame.
15. Remove the five screws securing the Cover Dummy
Lower and remove it.
Cover Dummy Lower
Samsung Electronics
16. Remove the CCD cable cover by flexing and
Channel
Base Frame
17. Release the belt from the underside of the scanner
Cover Scan Lower
releasing the front clip. Slide the scan module to a
position half way along the scanner bed and raise it
to a vertical position. Disconnect the CCD cable
module. Unclip the Shaft CCD and take out the
Scanner Module.
CCD Cable Cover
CCD Cable
Service Manual
5-5