[Fail Over] - LG ProBeam BU50RG Owner's Manual

8

[Fail Over]

[Ez Setting]
Set the priority of the input devices when a fault occurs. Automatically play the content stored in the device or run the
set app.
• [On/Off]: Turns [Fail Over] on or off.
• [Input Priority]: Set the priority of input sources for fail over.
• [Play Backup Content]: When there is no input signal, this feature automatically plays the content stored in the
device or runs the set app. When set to [On], [Auto Capture Images], [Media Storage], [SuperSign Content], and [SI
App/Play via URL] items are activated.
- [Auto Capture Images]: When the automatic input switches due to taking screenshots of an image or video that is
playing at regular intervals, this feature will play back the file.
-> - Capture time Interval: The time interval can be set to 30 min, 1 hour, 2 hours and 3 hours.
- [Media Storage]: When the automatic input switches due to the image and video file being uploaded, the feature
will play back the file.
-> - [Backup media select]: Using the settings button, you can upload a single file in the internal / external memory.
-> - [Preview]: You can preview the uploaded file.
- [SuperSign Content]: When the automatic input switches, this feature will play the file(s) distributed in SuperSign
CMS.
- [SI App/Play via URL] Run SI App or Play via URL when automatic input switch occurs.
-> - [SI App]: SI App behavior depends on the settings from [SI Server Setting] menu in [Ez Setting].
-> - [Play via URL]: Play via URL behavior depends on the settings from [Play via URL] menu in [Ez Setting].
-> - If both [Play via URL] and [SI Server Setting] can be run, it runs [Play via URL] when automatic input switch
occurs.
• [Reset]: Reset to initial settings.
[Fail Over]