Post-Requisites - Dell Alienware 15 R4 Service Manual

2 Align the screw holes on the touchpad bracket with the screw holes on the
palm-rest assembly.
3 Replace the five screws (M2x3) that secure the touchpad bracket to the
palm-rest assembly.
4 Slide the touchpad cable and touchpad-buttons cable into their respective
connectors on the touch pad and close the latches to secure the cables.
5 Slide the touchpad cable into the connector on the system board and close
the latch to secure the cable.

Post-requisites

1 Replace the battery.
2 Replace the
3 Replace the
4 Replace the
5 Replace the
6 Follow the procedure from step 4 to step 6 in
7 Replace the
computer base.
rear-I/O cover.
wireless card.
solid-state drive.
base cover.
"Replacing the hard drive".
63