4
0.33" - 0.35"
8.5 - 9 mm
Keep the distance of the connectors 0.33-0.35
inches (8.5-9 mm) to the surface of the tile.
5
Step 2
Step 1
Step 1: Place washers in tub filler.
Step 2: Screw in the tub filler body to the wall
connectors.
Step 3: Apply glue to the handshower holder (9) as
indicated and use tape (included) to secure onto wall.
Let it cure for 48 hours for complete result. Handshower
holder is tapered. Assure larger opening is upright.
Installation Instructions
Tile
Step 3
Glue
Tape
Back of handheld holder
6
Once handshower holder is secure, insert rubber
washer into both ends of hose. Connect hex head end
to tub filler and tapered end to handshower. Place the
tapered end of the hose into the handshower holder.
7
Product fully assembled
5