Panasonic SD-YD250 Manual page 26

Automatic bread maker

Hide thumbs Also See for SD-YD250:

Note:

With the exception , however, of motor operation, and temperature control for rising and baking.

6.1.1. Initial test mode

1. Insert the power cord into an electrical outlet while

simultaneously pressing all three of the "SELECT", "MENU", and

"TIMER" pads. / If the circuit board isfunctioning properly, the

initial test mode will be displayed as shown.

2. Form this mode, you can proceed to the following performance

check functions. To cancel, press the "Start/Stop" pad.

6.2. Function performance confirmation test

Note:

Before troubleshooting, use the following procedure to perform the function performance check

and refer to the "CHECK POINT" to find the locations of the malfunctions and carryout the

appropriate correction measures.

6.2.1. Motor operation test

1. Form the

Initial test mode

2. The LCD display will indicate as shown, and the operation LED

(Red) will light as shown by fig

3. The yeast dispensing chute will open for one second.

4. The motor will begin operation in the order shown by fig

operation test

5. To return to

Initial test mode

(6.1.1), press the "MENU" pad once.

table.

Initial test mode

Motor operation testLCD

(6.1.1), press "Start/Stop" pad once.

Motor

Table of Contents