Samsung WAM250 - Wireless Audio Multiroom Hub Manual

Front Panel

1. 
   This indicator turns on when power is supplied to the HUB.
2. 
   This indicator blinks when the HUB is in pairing mode.
   After pairing is complete, this indicator stops flashing and operates in normal mode.
   Pairing mode continues for a set time period. The indicator may keep blinking after pairing is completed.
3. 
   This indicator turns on when the HUB is connected to a wireless router with an Ethernet cable.
4. 
   This indicator turns on when the HUB is set to Repeater mode and used to expand wireless Wi-Fi coverage in a network that includes another HUB and a wireless router.
   If you have trouble connecting the HUB and Wireless Audio - Multiroom because the signal is blocked or the distance between them is too great, add a new HUB in Repeater mode to expand wireless coverage.

Adding a HUB

An Wireless Audio - Multiroom and a HUB may not pair successfully if the Wireless Audio - Multiroom and HUB are too far apart or are on different floors.
In such cases, you can link two HUBs together by setting the second HUB to Repeater mode. The additional HUB amplifies the signal and lets you pair the Wireless Audio - Multiroom to the closest HUB.

1. Set the HUB that is connected to the wireless router to Pairing mode by pressing its SPK ADD button for 1 second.
2. Plug in the new HUB you are using as an extender, and then press its SPK ADD button for 10 seconds.
3. The newly added HUB's LED indicators turn off and on, and it switches to Repeater mode.
4. Once the connection between the two HUBs has been established, the added HUB's ( ) indicator stops blinking.

• If your smart device is not connected to the wireless router with a Wi-Fi connection, the Wireless Audio - Multiroom will not appear on the Samsung Multiroom app.
• Place the HUB that is in Repeater mode in an appropriate location between the Wireless Audio - Multiroom and the HUB that is connected to the wireless router.
• You can set only one HUB to Repeater mode.

Rear Panel

1. SPK ADD
   Press this button to set the HUB to Pairing mode when adding an additional Wireless Audio - Multiroom or to switch the HUB to Repeater mode.
   (Press and hold for 1 second to switch to Pairing mode. Press and hold for 10 seconds to switch to Repeater mode.)
2. SERVICE
   Used to update the firmware.
   The SERVICE port is only for updating.
3. ETHERNET SWITCH
   Used to connect a LAN cable.
   If you want to connect another wired device to the router that the HUB is connected to, and all the router's wired ports are occupied, you can connect it to an unoccupied LAN port on the HUB.
   Connecting to the HUB provides the same functionality as being connected to the router. However, the link to the router will be lost if you power off (unplug) the HUB.
   Note: The HUB and the router must have a hard-wired connection.
4. RESET
   Press the RESET button with a pen tip for 5 seconds to reset the HUB.
5. DC IN
   Connector for the power cable.

What's included

Connecting the HUB to Your Wi-Fi Network

• A Wireless Audio - Multirooms can be used anywhere your Wi-Fi signal reaches.

1. Connect the HUB to your router or modem using a LAN cable.
2. Plug the included power cable into the back of the HUB, and then plug the power cord into a wall socket.
3. After the Pairing Indicator on the HUB lights, plug in the Wireless Audio - Multiroom.
   (For more information, see the User Manual.)

Safety precautions

Power Supply Precautions

• Do not overload outlets or extension cords.
  • This may result in abnormal heat or fire.
• Do not plug in or unplug the power cord with wet hands.
• Do not place the product near heating equipment.
• To clean the power plug blades, remove the plug from the wall outlet and wipe the blades with a dry cloth only.
• Do not bend the power cord or pull it forcefully.
• Do not put heavy objects on the power cord.
• Do not plug the power cord into a loose or damaged outlet.
• Fully insert the power cord's plug into the the wall outlet so that the plug is firmly attached to the outlet.
  • If the connection is unstable, there is a risk of fire.

Installation Precautions

• Do not install the product near equipment or objects that generate heat or produce fire (candles, mosquito coils, heaters, radiators, etc.). Do not install in direct sunlight.
• When moving the product, turn off the power and disconnect all cords (include the power cord) from the unit.
  • A damaged cord may cause a fire and poses a risk of electric shock.
• Installing the product in environments with high heat or humidity, dust, or extreme cold, can lead to quality problems or cause the product to malfunction. Before you install the product in an environment that is outside the norm, please contact a Samsung service center for additional information.
• When placing the product on a shelf, cabinet, or desk, make sure the top panel faces upwards.
• Do not place the product on an unstable surface (e.g. a shaky shelf, a tilted desk, etc.).
  • Dropping the product can cause it to malfunction and poses a risk of injury. Severe vibration or impact can also cause the product to malfunction and lead to a fire hazard.
• Install your product with enough space around it for ventilation.
  • Leave at least 4 inches (10cm) at the rear of the product and more than 2 inches (5cm) on each side of the product.
• Keep the plastic packing materials out of reach of your children.
  • Children playing with the plastic packing materials run the risk of suffocation.

Usage Precautions

• Using for an extended time at high volume may cause serious damage to your hearing.
  • If you are exposed to sound louder than 85db for an extended time, you may adversely affect your hearing. The louder the sound is, the more seriously damaged your hearing may become. Note that an ordinary conversation is between 50 to 60 db and road noise is approximately 80 db.
• This product contains dangerous high voltage. Do not attempt to disassemble, repair, or modify it yourself.
  • Contact a Samsung service center when your product is in need of repair.
• Do not place any container that contains liquid on the product (e.g. a vase, beverages, cosmetics, chemicals, etc.). Do do not allow any metal objects (e.g. coins, hair clips, etc.) or flammable material (e.g. paper, matches, etc.) to enter the product (through the air vents, I/O ports, etc.).
  • If any harmful material or liquid enters the product, turn off the product immediately, unplug the power cord, and then contact a Samsung service center.
• Do not drop the product. In case of a mechanical breakdown, disconnect the power cord and contact a Samsung service center.
  • There is a risk of fire or electric shock.
• Do not hold or pull the product by the power cord or the signal cable.
  • A damaged cable can cause the product to malfunction, cause a fire, and poses a risk of electric shock.
• Do not use or keep flammable materials near the product.
• If the product emits an abnormal sound or a burnt smell or smokes, unplug the power-cord immediately and contact a Samsung service center.
• If you smell gas, ventilate the room immediately. Do not touch the power plug of the product. Do not turn the product off or on.
• Do not strike or subject the product to a sudden shock. Do not pierce the product with a sharp object.

Cleaning Precautions

• Never use alcohol, solvents, waxes, benzene, thinners, air freshener, or lubricants to clean the product, or spray insecticide on the product.
  • Using any of these materials can discolor the exterior coating or cause it to split or peel off, or remove the labelling on the product.
• To clean the product, unplug the power cord, and then wipe the product with a clean, dry, soft cloth (Microfiber, cotton).
  • Avoid leaving dust on the product. Dust can scratch its the surface.

About the Network Connection

• Depending on the wireless router used, some network operations may perform differently.
• For detailed information on networking with a wireless router or modem, refer to the router's or modem's documentation.
• Select one wireless channel that is not used currently. If the selected channel is used by another communication device nearby, radio interference may result in communication failure.
• In compliance with the newest Wi-Fi certification specifications, the HUB does not support WEP, TKIP, or TKIP-AES (WPA2 Mixed) security encryption in networks running in the 802.11n mode.
• By its nature, wireless LAN may experience radio interference depending on the environmental conditions (such as wireless router performance, distance, obstruction, interference with other wireless devices, etc.)
• WEP encryption does not work with WPS (PBC) / WPS (PIN).
• Connecting the HUB to an AP whose IP address is 10.0.0.x may not be successful.

Compatible products

Some devices may not be compatible with the product.

Copyright

© 2014 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user's manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd.

Specifications

• Network speeds equal to or below 10Mbps are not supported.
• Design and specifications are subject to change without prior notice.
• For the power supply and power consumption, refer to the label attached to the product.
• Weight and dimensions are approximate.
• This User Manual is based on the product using the Android or iOS operating system.
• For further details on using the product, visit www.samsung.com