TOOLS REQUIRED FOR ASSEMBLY
(1) 3/4" Wrench or Adiustable Wrench
(1) 11/16' Wrench or Adjustable Wrench
(1) 5/8" Wrench or Adjustable Wrench
(2) 9/16" Wrenches or Adjustable Wrenches
(2) 1/2" Wrenches or Adjustable Wrenches
•
Remove the hardware pack and all parts from the
carton. Be sure the carton is empty before discard-
ing,
•
Lay out ell parts and hardware as shown on page 3.
FOR TRACTORS RESEMBUNG FIGURE 1:
•
Remove the boltfrom the hole on each side of the
tractorframe as shown in figure 1.
•
Assemble the two shoulder boltsto the now empty
holes. Tighten. See figure 1,
SHOULDER BOLT
FIGURE 1
FOR TRACTORS RESEMBLING FIGURE 2:
•
Remove the bolt and nut from the hole on each side
of the tractorframe as shown in figure 3,
•
Assemble two shoulder boltsand 3/8" flanged lock
nuts to the now empty holes. Tighten. See figure 3.
SHOULDERBOLT
,3/6.FLANGED
_LOCKNUT
FIGURE 3
•
Assemble the right and left mounting brackets to the
hitchbracket using four 5/18' x 3/4" hex bolts and
5/16" hex lock nuts, Do not tighten yet. See figure 4,
LEFT HAND
MOUNTINGBRACKET_J
_14a.Mm,,
RIGHT HAND
_
J
5/16"x 3/4"
MOUNTINGBRACKET _
1.7
HE)( BOLT
FIGURE 4
Assemble the right hand and left hand mounting
brackets to the hitch bracket usingfour 5/16" x 3/4"
hex bolts and 5/16" hex lock nuts. Do not tighten
yet. See figure 2.
LEFT HAND
MOUNTING
_
5/16. HE)(
HITCH BRACKET
dl . /
5/16. x 3/4"
7
L/
HEX BOLT
RIGHTHAND
MOUNTING
BRACKET
FIGURE
2
FOR BOTH TYPES OF TRACTORS
•
Assemblethe brace strap to the mounting brackets
usingtwo 5/16' x 3/4" he:<bolts and 5/16" hex lock
nuts. Do not tighten yet. See figure 5.
•
Assemble two 3/8" x 1• hax bolts, bushingsand 3/8"
flanged lock nuts to the slots in the hitch bracket. Do
not tighten yet. See figure 5.
5/6. x 1"
5/16" x3/4"
HE)( BOLT_,_tl
HEXBOLT
BRACESTRAP
_ _*
FIGURE
5
4