Oregon Scientific TW331 - 2-Channel Clock Timer With LED Alert Manual
GETTING STARTED
Insert 2pcs AAA size batteries into the battery compartment, pay attention to the polarity.
PRODUCT DESCRIPTION
- Timer 1
- Timer 2
- Memory
- Hour
- Minute
- Second
- Start/Stop
- Alert volume switch
- Wall mount hole
- Magnet
- Table stand
- Battery door
DISPLAY SYMBOLS
- Timer mode icon
- Timer 1 window
- Timer 2 window
- Hour
- Minute
- Second
- Count up icon (Stopwatch)
- Countdown icon (Timer)
- Clock
- Alert volume icon
CLOCK SETTING
- Toggle Timer 2 window from Timer mode to Clock mode by press and hold "T2" for 2 seconds.
- In Clock mode, press and hold "T2" for 2 seconds to enter time setting.
- Press "Hour" or "Minute" button to adjust the time.
- Press "Second" to select 12/24 hour format.
- Press "T2" key to confirm the time setting.
NOTE
In Clock mode, press "T2" once to return to Timer mode
TIMER
- Select the timer channel by pressing "T1" or "T2".
- Set the countdown time by pressing "Hour", "Minute" and "Sec".
- Or set the countdown time by pressing "M" to recall the previously stored memory.
- Press "S/S" to start countdown function, the countdown icon and green LED will flash.
- When timer reaches 0:00:00, the timer will count up indicating how much time is passed and red LED will flash.
- Press "S/S" to stop countdown function.
STOPWATCH
- Select the timer channel by pressing "T1" or "T2".
- Reset timer value to zero by pressing "HR" and "MIN" simultaneously.
- Press "S/S" to start stopwatch function, the count up icon and green LED will flash.
- Press "S/S" to stop the count up or it will stop automatically when it reaches 99:59:59.
MEMORY
- Select the timer channel by pressing "T1" or "T2".
- Press and hold "M" for 2 seconds to enter memory setting mode with all digits flashing.
- Set the memory by pressing "Hour", "Minute" and "Sec".
- Press "M" key to confirm the memory setting.
ALERT VOLUME
- Adjust Alert Volume by adjusting alert volume switch.
- "Mute/Lo/Hi" can be selected for the alert volume.
NOTE
Alert LED flashes regardless which alert volume is selected.
PRECAUTIONS
This product is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions:
- Do not cover the ventilation holes. Make sure items that are nearby such as newspapers, tablecloths, curtains etc cannot accidentally cover the ventilation holes.
- Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts.
- Placement of this product on wood surfaces with certain types of finishes, such as clear varnish, may result in damage to the finish. Consult the furniture manufacturer's care instructions for direction as to the types of objects that may safely be placed on the wood surface. Oregon Scientific shall not be responsible for any damage to wood surfaces from contact with this product.
- Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.
- Do not clean the unit with abrasive or corrosive materials.
- Do not tamper with the unit's internal components. Doing so will invalidate the warranty on the unit and may cause unnecessary damage. The unit contains no user-serviceable parts.
- Only use fresh batteries as specific in the user's instructions. Do not mix new and old batteries.
- Due to printing limitations, the displays shown in this manual may differ from the actual display.
- The contents of this manual may not be reproduced without the permission of the manufacturer.
- Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
NOTE
The technical specifications for this product and the contents of the user manual are subject to change without notice.
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products.
For any enquiry, please contact our Customer Services at (info@oregonscientific.com).
Hereby, Oregon Scientific, declares that this 2-Channel Clock Timer with LED Alert (Model: TW331) is in compliance with EMC 2004/108/CE. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service.
Declare that the product
Product No.: | TW331 |
Product Name: | 2-Channel Clock Timer with LED Alert |
Manufacturer: | Oregon Scientific, Inc. |
Address: | Block C, 9/F, Kaiser Estate, Phase 1,41 Man Yue St., Hung Hom, Kowloon, Hong Kong |
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Oregon Scientific TW331 - 2-Channel Clock Timer With LED Alert Manual
Need Assistance?
Do you have a question about the TW331 that isn't answered in the manual? Leave your question here.