Advertisement
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAFETY REQUIREMENTS
Risk of fire or explosion. Flammable refrigerant used. Do not puncture refrigerant tubing.
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
Children should be supervised to ensure that they do not play with the appliance.
Risk of child entrapment. Before throwing away an old appliance:
SAFETY REQUIREMENTS
This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities may be different or reduced, or who lack experience or knowledge, unless such persons receive supervision or training to operate the appliance by a person responsible for their safety.
This appliance is intended to be used in household and similar applications such as:
GROUNDING INSTRUCTIONS
This appliance must be grounded. Grounding reduces the risk of electrical shock by providing an escape wire for the electrical current.
This appliance has a cord that has a grounding wire with a 3-prong plug. The power cord must be plugged into an outlet that is properly grounded. If the outlet is a 2-prong wall outlet, it must be replaced with a properly grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency the appliance is designed for.
Improper use of the grounding plug can result in a risk of electric shock. Consult a qualifi ed electrician or service agent if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.
Do not connect your appliance to extension cords or together with another appliance in the same wall outlet. Do not splice the power cord. Do not under any circumstances cut or remove the third ground prong from the power cord. Do not use extension cords or ungrounded (two prongs) adapters.
SAVE THESE INSTRUCTIONS!
LOCATION
DOOR HANDLE INSTALLATION
The door handle is not pre-attached to the appliance, it is shipped separately to protect it from damage and it must be installed by the end user.
If the appliance is placed on its back or side for any length of time during this process, it must be allowed to remain upright for 6 hours before plugging it in to avoid damage to the internal components.
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of time during this process, it must be allowed to remain upright for 6 hours before plugging it in to avoid damage to the internal components.
FEATURES
CONTROL PANEL
FUNCTION INSTRUCTION
When the appliance is plugged in for the fi rst time, the default temperature setting is 54°F (12°C). The default temperature scale is °F.
To switch the display between °F and °C, depress the upper and lower temperature buttons simultaneously for approximately 3-5 seconds.
The temperature can be set as low as 41°F (5°C) or as high as 64°F (18°C).
Actual temperature inside the appliance can vary based on ambient temperature, how often the door is opened and how many warm bottles have recently been added to the appliance.
Each depression of the upper or lower temperature zone button will lower the temperature of that zone in 1° increments. The temperature adjustment only goes in one direction; downwards. Once the temperature has reached its lowest point, 41°F, it will revert back to 64°F and the temperature can be lowered in 1° increments.
INTERIOR LIGHT
The interior light will default to turning on and off when the door is opened or closed.
Press the light button once to turn the light off while the door is open. The light will resume default functioning when the door is closed.
Press the light button twice to set the light to continuous illumination. The light will remain on when the door is opened and closed.
When the light is set to continuous illumination, press the light button once to return to default functioning.
ALARMS
Door Ajar Alarm: If the door is not closed completely for 5 minutes, an alarm will sound. Close the door to silence the alarm.
If the door is closed and the alarm continues to sound, check that the actuator at the bottom of the door is making contact with the switch on the appliance.
Temperature Alarm: If the inner cabinet temperature is higher than 73°F (23°C) for one hour, the error code "HI" will show on the display panel and an alarm will sound.
If the inner cabinet temperature is lower than 32°F (0°C) the error code "LO" will show on the display panel and an alarm will sound.
If the inner cabinet temperature remains at 32°F (0°C) the error code "CL" will show on the display panel and an alarm will sound. The appliance will stop functioning to prevent the contents from freezing.
MEMORY
If the appliance loses power, the control panel will remember the set temperature. Once power is restored, the appliance will return to normal functioning automatically.
STORAGE INSTRUCTIONS
The maximum capacity of this appliance is 38 wine bottles of 750 ml size.
Position wine bottles alternately (head-to-tail) on each of the upper 4 shelves. This will allow storage of 7 bottles per shelf. See figure A.
Position 5 wine bottles on the bottom two shelves. See figure B.
SHELF INSTRUCTIONS
Do not cover shelves with aluminum foil or any other material as this will impede air fl ow inside the cabinet and can adversely affect the interior cabinet temperature.
LEVELING INSTRUCTIONS
There are two adjustable feet on the bottom of the appliance that can be turned up or down to ensure that the appliance is level.
CLEANING
Ensure the appliance is unplugged before cleaning.
Note: Do not use cleaners containing ammonia or alcohol on the appliance. Ammonia or alcohol can damage the appearance of the appliance. Never use any commercial or abrasive cleaners or sharp objects on any part of the appliance.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, take the proper steps to protect your contents.
Note: Wait 3 to 5 minutes before attempting to restart the appliance if operation has been interrupted.
ERROR CODES
If the "HI", "LO" or "CL" error codes appear on the display for more than 5 minutes, a power reset may rectify the issue. Unplug the appliance, wait 5 minutes and then plug the unit back in. If the error code persists after a power reset, contact consumer care or an authorized service agent.
DEFROST
This unit is equipped with an automatic defrost function and does not require manual defrosting. Defrost water from the appliance is channeled into a drip tray located above the compressor. Heat transfer from the compressor causes the defrost water to evaporate.
VACATION
MOVING
DISPOSAL
This appliance may not be treated as regular household waste, it should be taken to the appropriate waste collection point for recycling of electrical components. For information on local waste collection points, contact your local waste removal agency or government office.
PROBLEM | POSSIBLE CAUSE |
No power |
|
Internal temperature not cold enoughAppliance runs continuouslyAlarm sounding and "HI" on the display panel |
|
Condensation on the cabinet or door |
|
Alarm sounding and "LO" or "CL" on the display panel |
|
www.Danby.com
DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9
DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Danby DWC114BLSDD - 38 Bottle Free-Standing Wine Cooler Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the DWC114BLSDD that isn't answered in the manual? Leave your question here.