Set Up Guest Mode; Use Guest Mode; Hardware Key Control Mode - Sprint LGLS990 User Manual

Set Up Guest Mode

Follow the steps below to set up Guest mode and begin using it.
1. Tap >
2. Tap Lock Screen type, then set the pattern you want to use to put your device in Guest mode.
Set the unlock pattern

Set the Guest mode pattern

3. Tap Allowed app to view which apps can be accessed in Guest mode.
Checkmark the apps that can be accessed.

Remove checkmarks from the apps that you don't want to be accessed.

4. Tap the switch to ON next to Guest mode.
Note: If your unlock sequence is set to a Knock Code, PIN or password, you will need to enter it to be
able set the unlock pattern.

Use Guest Mode

After you've set up and enabled Guest mode, lock the screen so that you can enter your Guest mode
pattern. The Guest mode Home screen is displayed with only the apps you've selected for guest access.
To exit Guest mode, enter your normal unlock pattern on the Lock screen.
Note: The Guest mode switch is automatically turned off if your lock sequence is changed from Pattern.
Otherwise, manually disable it if you no longer want to allow guest access.

Hardware Key Control Mode

If your phone display is damaged or broken, you can answer an incoming call, end a call, or turn off an
alarm using the hardware keys.
1. Turn your phone off.
2. Press and hold the Power/Lock Button
more than 6 seconds to enter the Hardware key control mode.
3. Press the Volume Keys
Button to confirm.
Answer a call: Press either of the Volume Keys.

End a call: Press the Power/Lock Button during a call.

Stop an alarm: When an alarm rings, press and hold the Volume Up Key or Volume Down

Key to stop the alarm.
Phone Basics
> Settings > Guest mode.
to scroll to the desired option, then press the Power/Lock
and the Volume Keys at the same time for
14