Panasonic DMP-BDT230 Operating Instructions Manual page 40

Network
I can't connect to the network.
Confirm the network connection and settings.
( 13, 14, 33)
There may be obstacles that prevent the unit
from detecting your home network. Bring the
unit and the wireless router closer to each
other. This unit may be able to detect your
network name (
Check the operating instructions for each
device and connect accordingly.
Cannot play current title.
Confirm the network connection and settings.
( 13, 14, 33)
When using wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
Higher transfer rate router such as 802.11n
(2.4 GHz or 5 GHz)* wireless router may
solve the problem. If you use 802.11n
(2.4 GHz or 5 GHz)* wireless router, it is
necessary to set the encryption type to
"AES".
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
On the "Wireless Settings" screen (
continuous lighting of at least 4 "Reception"
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the "Easy Network
Setting" ( 14) again.
* [BDT130] 2.4 GHz band only
40
VQT4V74
15, "SSID").
33), the