Panasonic DMP-BDT230 Operating Instructions Manual page 33

Language
∫ Soundtrack Preference
Choose the language for audio.
≥ If "Original" is selected, the original language of
each disc will be selected.
≥ Enter a code ( 45) when you select "Other
¢¢¢¢".
∫ Subtitle Preference
Choose the language for the subtitle.
≥ If "Automatic" is selected and the language
selected for "Soundtrack Preference" is not
available, subtitles of that language will
automatically appear if available on that disc.
≥ Enter a code ( 45) when you select "Other
¢¢¢¢".
∫ Menu Preference
Choose the language for the disc menus.
≥ Enter a code ( 45) when you select "Other
¢¢¢¢".
∫ Subtitle Text
Select a suitable item according to the language
used for MKV/Xvid subtitles text.
≥ This item is displayed only after playing back a
file.
∫ On-Screen Language
Choose the language for menus and on-screen
messages.
Network
∫ Easy Network Setting (
∫ Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
LAN Connection Mode
Select the LAN connection method.
≥ [BDT330] [BDT230] Select "Wireless Master"
when you make a direct wireless connection
between this unit and a Home Network
device. Internet connection is not available
when this item is selected.
Wireless Settings
This allows the wireless router and connection
settings to be set. Current connection settings
and connection state can be checked.
Press [OK] to show the following settings:
Connection Setting
The wireless router connection wizard will be
displayed.
Double Speed Mode Setting (2.4GHz)
Set the connection speed for a 2.4 GHz
wireless format.
≥ If you connect using the "Double Speed
Mode (40MHz)", 2 channels use the same
frequency band, and there is consequently
a greater risk of reception interference. This
can cause the connection speed to drop or
become unstable.
IP Address / DNS Settings
This is for checking the state of the network
connection and setting the IP address and
DNS-related.
Press [OK] to show the respective setting.
Proxy Server Settings
This is for checking the state of connection with
the Proxy server and performing settings.
Press [OK] to show the respective setting.
14)
33
VQT4V74