General Tv Operation; Using The Channel List; Teletext; Digital Teletext - FUNAI 32FDV5755 Manual

TV Menu Features and Functions
Power Up Mode
Biss Key
Install and Retune Menu Contents
Automatic Channel
Scan (Retune)
Manual Channel Scan
Network Channel
Scan
Analogue Fine Tune
First Time Installation

General TV Operation

Using the Channel List

The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active
stations to be listed by using the Channel List options.

Teletext

"
Press " button to enter. Press again to activate mix mode. Press once more to exit. Follow the instructions
displayed on digital teletext screen.

Digital Teletext

"
Press " button to view digital teletext information. Operate it with the coloured buttons, cursor buttons and the
OK button. The operation method may differ depending on the contents of the digital teletext. Follow the instructions
displayed on the digital teletext screen. When the "
Configuring Parental Settings
To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system.
To display parental lock menu options, the PIN number should be entered. The factory default PIN number is
0000. After coding the correct PIN number, parental settings menu will be displayed.
Menu Lock: Menu lock setting enables or disables the menu access.
Maturity Lock: When set, this option gets the maturity information from the broadcast and if this maturity level
is disabled, disables access to the broadcast.
Child Lock: When Child Lock is set, the TV can only be controlled by the remote control. In this case the
control panel buttons will not work.
Set PIN: Defines a new PIN number.
Default PIN code can change depending on the selected country.
If you are asked to enter a PIN code for viewing a menu option, use one of the following codes: 4725, 0000
or 1234.

Electronic Programme Guide (EPG)

Some, but not all channels send information about the current and next programmes. Press the
to view the EPG menu.
This setting configures the power up mode preference.
Biss is a satellite signal scrambling system that is used for some broadcasts. If you need
to enter BISS key on a broadcast, you can use Biss Key setting located in the Other
Settings menu. Highlight Biss Key and press OK to enter keys on the desired broadcast.
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB
stations. Digital Cable: Searches and stores cable DVB stations. Analogue: Searches
and stores analogue stations. Digital Aerial & Analogue: Searches and stores aerial
DVB and analogue stations. Digital Cable & Analogue: Searches and stores cable
DVB and analogue stations. Satellite: Searches and stores satellite stations.
This feature can be used for direct broadcast entry.
Searches for the linked channels in the broadcast system.
You can use this setting for fine tuning analogue channels. This feature is not
available if no analogue channels are stored.
Deletes all stored channels and settings, resets TV to factory settings.
English - 12 -
"
button is pressed again, the TV returns to television broadcast.
button