Related Manuals for TRENDnet TS-I300
Summary of Contents for TRENDnet TS-I300
- Page 1 Quick Installation Guide TS-I300 TS-I300W...
-
Page 2: Table Of Contents
Table of Contents Table of Contents English ... 1. Before You Start Hardware Installation Configure the Storage Server 4. Accessing Storage Devices on TS-I300/TS-I300W ... Troubleshooting ... Version 07.06.2006... -
Page 3: English
IDE Internal Hard Drive or USB 2.0 Storage Device (i.e. flash drive, external hard drive; not included) Windows XP, 2000, NT, ME, 98, Linux Application USB 2.0 & IDE Network Storage Enclosure USB 2.0 & IDE Wireless Network Storage Enclosure Package Contents TS-I300/TS-I300W User's Guide CD-ROM Quick Installation Guide Mounting Stand AC Power Adapter (12V DC, 3.0A) -
Page 4: Hardware Installation
2. Hardware Installation Note: Before installing the IDE hard drive, the jumper settings must be set to Master. 1. Remove the two screws from the rear panel to detach the cover. 2. Make sure the jumper settings on the hard drive is set to Master. 3. - Page 5 6. Attach the mounting stand to the Storage Server. 7. Connect a RJ-45 cable from the Switch/Hub to the LAN port of the Storage Server and then connect the 2dBi Detachable Antenna (TS-I300W). 8. Connect the External Power Adapter to the Storage Server and then to a power outlet.
-
Page 6: Configure The Storage Server
3. Configure the Storage Server Note: Install and use the Easy Search Utility to discover all the TS-I300/TS- I300W on the network, assign IP Address, change the host name and workgroup, and mount or unmount the hard drive. For Windows Users 1. - Page 7 Note: If your hard drive has already been formatted, please skip to step 9. If you are attaching a brand new hard drive, please continue on to step 5. 5. Click Format Hard Drive. 6. Click OK. 7. Click Restart. 8.
- Page 8 9. Enter the User name and Password, and then click Config. User Name: admin Password: admin Note: For the TS-I300 skip to section 4. For the TS-I300W continue on to step 10. Click Advanced and then Wireless. 11. Click Access Point, and then click Enable.
-
Page 9: Accessing Storage Devices On Ts-I300/Ts-I300W
4. Accessing Storage Devices on TS-I300/TS-I300W 1. Select the hard drive, and then click Mount. 2. Click OK. 3. Double-click on My Computer. Then double-click on any mounted hard drive under Network Drives. Your storage device is ready for access... -
Page 10: Troubleshooting
I specified the IP address http://192.168.1.2 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TS-I300/TS- I300W's web configuration page? First, check your hardware settings again by following the instructions in section 2. - Page 11 Third, contact the manufacturer of your wireless network adapter. Make sure the wireless network adapter is configured with the proper SSID. The default SSID of the Access Point is TRENDnet. If you still encounter problems or have any questions regarding the TS-I300/TS-I300W, please contact TRENDnet's Technical Support Department. Certifications This equipment has been tested and found to comply with FCC and CE Rules.
- Page 12 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com 3135 Kashiwa Street Torrance, CA 90505 Copyright ©2006. All Rights Reserved. TRENDnet.