TPE-101I F.A.Q.
Q: What is the purpose of using TPE-101I?
A:
TPE-101I can supply power and data together from the existing network to a Power over Ethernet
(IEEE 802.3af standard) enabled device.
Q: How much power does TPE-101I supply?
A:
TPE-101I supplies 48V power and any PoE devices that use the IEEE 802.3af standard should be
compatible.
Q: Can a TPE-101I work alone without a PoE splitter?
A:
Yes, it can work alone but it has to work with compatible PoE devices.
Q: What PoE devices are compatible with the TPE-101I?
A:
Since the TPE-101I uses the IEEE 802.3af standard, any PoE device that uses the IEEE 802.3af
standard will work.
Q: What PoE devices are compatible with the TPE-101I?
A:
Since the TPE-101I uses the IEEE 802.3af standard, any PoE device that uses the IEEE 802.3af
standard will work.
Q: What TRENDnet products are compatible with the TPE-101I?
A:
The TEW-453APB
Q: Why would I need the TPE-101I?
A:
You would need the TPE-101I when a PoE device, such as an access point, has no access to
power cabling. Using theTPE-101I will allow any PoE device to be placed anywhere, independent
from power outlets, extensions cords, or other power cabling because the TPE-101I will supply the
PoE device with power and data through a CAT 5e networking cable.