Craftsman ZT 7000 107.2777 Operator's Manual page 17

MAINTENANCE SCHEDULE
The following schedule should be followed for normal care of your rider and mower. You will need to keep a record of
your operating time. Determining operating time is easily accomplished by observing the elapsed time recorded by
the hour meter.
RIDER MAINTENANCE Before Every Spring 8 25 100 200
ITEMS Each Use & Fall Hours Hours Hours Hours
Clean Debris from Rider and Engine =
Compartment *
Clean Debris from Engine Cooling Areas ®
& Air Filter *
Check Tire Pressure •
Lubricate Rider & Mower * ®
Clean Deck & Check/Replace Mower •
Blades
Clean Battery & Cables ®
Check Rider Safety System ** • •
Check / Adjust PTO Clutch •
ENGINE MAINTENANCE ITEMS
Check Engine Oil Level • •
Service Air Filter Pre-Cleaner * ®
Replace Air Filter *
Change Engine Oil *
Replace Spark Plug
Replace Fuel Filter
Change Engine Oil & Filter *
• More often in hot (over 85 ° F: 30 ° C) weather or dusty operating conditions.
•* Check the function of the safety system after the unit has been stored for 30 days or longer.
o
®
®
o
®
17