Installing Filler Panels
Using the Chassis Initialization File
© National Instruments Corporation
Figure 2-3. Injector/Ejector Handle Position during Module Insertion
To optimize module cooling performance, install filler panels into unused
or empty slots. Secure with the captive mounting screws.
To assist system integrators, the PXI specification requires manufacturers
of PXI chassis and system modules to document the capabilities of their
products. The minimum documentation requirements are contained in
files, which consist of ASCII text. The system integrator can read the
.ini
file, and configuration utilities and device drivers can also use this
.ini
file. The PXI-1000 chassis initialization file,
the diskette for your PXI-1000.
Chapter 2
2-7
Installation and Configuration
, is included on
chassis.ini
PXI-1000 User Manual