Baofeng UV-5G PLUS User Manual page 35

The radio keeps transmitting.
NOTE: If the above solutions cannot fix your problems, or you may have some other queries, please contact your dealer for
more technical support.
Appendix B. - Shortcut Menu operations
Name
MENU
(Full Name)
SQL
0
- Squelch Level
STEP
1
–Step Frequency
TXP
2
– Transmit Power
SAVE
3
- Battery Save
VOX
4
– Voice Operated TX
WN - Wideband /
5
Narrowband
electromagnetic interference).
VOX may be turned on or the headset is not installed in
place
Settings
[0 - 9]
Setting the squelch to 0 will open up the
squelch entirely.
2.5K[0] | 5.0K[1] | 6.25K[2] |
10.0K[3] | 12.5K[4] | 20.0K[5] |
25.0K[6] | 50.0K[7]
HIGH |Middle | LOW
OFF [0] | 1 | 2 | 3 | 4
OFF [0] | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10
WIDE [0] | NARR [1]
interference.
Turn off the VOX function. Check that the
headphones are in place.
Squelch silences the receiver when there is no
signal.
- Sensitivity can be varied from .1 to .3 mV on
UHF
Sensitivity can be varied from .1 to .2 mV on VHF
Selects the amount of frequency change in
VFO/Frequency mode when scanning or
pressing the
HIGH =5W; Middle=3W; LOW=0.5W
Selects the ratio of sleep cycles to awake cycles
(1:1, 2:1, 3:1, 4:1). The higher the number the
longer the battery lasts. The higher number
increases the RX sleep cycle, but you may miss
the first few syllables before the RX opens.
When enabled it is not necessary to press the
[PTT] key on the transceiver. Adjust the gain level
to an appropriate sensitivity to allow smooth
transmission.
Wideband (25 kHz bandwidth) or narrowband
(12.5 kHz bandwidth).
35
Description
/
keys.