Preferences / Vcr; System Information; Restore Defaults - Sanyo DVR-V100E User Manual

PREFERENCES / VCR

This feature enables you to search for Index marks or specific times on your VHS
tapes.
1
While 'Preferences' is selected, press [†] to move to the second level.
2
Use [.../†] to select 'VCR'.
3
Press [ENTER] to display the submenu.
4
Select 'Index+', 'Index–' or 'Go to Zero'.
5
If you select 'Index+' (or 'Index–') and press [ENTER], your DVD Recorder+
VCR will locate your index mark and begin playback.
6
If you select 'Go-To Search' and press [ENTER], your DVD Recorder+ VCR will wind to the position 0:00:00
and stop.
VCR
Index+
Index–
Go to Zero
• The VCR menu is activated only when a video cassette tape is inserted.

System Information

System Information helps service personnel identify key firmware information
about your DVD Recorder+VCR in case service is required.

Restore Defaults

If you wish, you can reset the DVD Recorder+VCR to its original factory
settings.
1
Press [SETUP].
2
Use [œ/√] to select 'Restore Defaults'.
3
Press [ENTER].
4
The Initialize menu will appear. Use the [.../†] buttons to select
'Yes' and press [ENTER].
• Some options cannot be reset, including Parental Controls, Password,
and Country Code.
• After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the
country, language, channel, and clock settings again.
32
VCR
Index+
Index–
Go to Zero
Restore Defaults
Initial Setup
Preferences
Video
Audio
Parental Controls
Auto Settings
VCR
Instructions
Enter-Confirm Setup-Exit
Move ...†
VCR
Index+
Index–
Go to Zero
System Info
Version EP Set 1.0
Main Build DR3-1.0.2
Micom Software
DVD Navigation
Loader Version DVS-RA20
Instructions
Enter-Confirm Setup-Exit
Move ...†
If you select this function all
settings will be removed and
Are you sure you want to restore
the product will be set into
default settings?
initial (factory) mode.
Yes
No
Instructions
Enter-Confirm Setup-Exit
Move ...†
0.0.0
1.0.0