CaUTION: dO NOT aSSeMBLe wITH
POwer rake PLUGGed INTO a
POwer SOUrCe
STeP 1:
(See FIGUre 1)
•
Attach the handle attachment brackets to each side
of the lower handle tube.
FIGUre 1
STeP 2:
(See FIGUre 2)
•
Fasten the handle attachment brackets and lower
handle tube to the Power Rake housing using two
carriage bolts (D), washers (E) and wing knobs (A).
D
E
A
FIGUre 2
4
aSSeMBLY
STeP 3:
(See FIGUre 3)
•
Attach the long end of each of the middle handle
tubes to the lower handle tube using 2 carriage bolts
(D) and wing knobs (A).
SHORT END
LONG END
FIGUre 3
STeP 4:
(See FIGUre 4)
•
Slide the cord holder (6) onto the right middle handle
tube.
6
FIGUre 4
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
D
A