Table of Contents
Advertisement
Operating the appliance
Note: Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Controls
Use the remote control to set and adjust the various different
functions of your appliance.
Note: The remote control requires CR2032/3 V batteries. Refer
to the Changing the batteries in the remote control section for
instructions on how to insert the batteries.
Note: Point as accurately as you can with the remote control to
the infrared receiver on the extractor hood's control panel.
Note: Heat and penetrating moisture may damage the remote
control. Never expose the remote control to intense heat or
moisture.
Remote control
Operating buttons
Button
Explanation
Switch the extractor hood on and off
"
Switch the lighting on and off
k
Switch on intensive mode
=
Switch on the run-on function/intermittent
K
function
Increase the fan setting
@
Decrease the fan setting
A
Extractor hood's control panel
Operating buttons
(
Infrared receiver
0
Operating buttons
Button
Explanation
Switches the extractor hood on and off
#
Switches on fan setting 1, 2, 3/intensive mode
û
Switches on the run-on function/intermittent
Þ
function
Switches the lighting on and off
=
Note: To switch on fan setting 3, for example, you do not need
to press all three
û û û
buttons at the same time; you simply
need to press the third button to the right of the
Switching the appliance on and off
Note: Always adjust the setting according to the current
conditions. To eliminate strong cooking smells, select a high
fan setting.
Switching on the appliance
Press the
button on the remote control or the
"
the extractor hood's control panel.
The extractor hood starts at fan setting 1.
The
#
button and the first
setting 1 has been selected.
Selecting the fan setting
To apply a power setting, press the
remote control or the
û
button for the power setting you require
on the extractor hood's control panel.
The
button and the first
#
setting 1 has been selected.
The
button and the first two
#
power setting 2 has been selected.
The
button and the first three
#
power setting 3 has been selected.
Fan setting 1
Fan setting 2
Fan setting 3
Switching off the appliance
Press the
button on the remote control or the
"
the extractor hood's control panel.
#
button.
button on
#
û
button will light up when power
@
or
A
button on the
button will light up when power
û
buttons will light up when
û
buttons will light up when
û
button on
#
5
Advertisement
Table of Contents
