Limited Responsibility Declaration; Maintenance And Warranty; Ce Regulation; Packaging - Taurus MNL214.1 Instruction Manual

1.5 LIMITED RESPONSIBILITY DECLARATION

Any updates to the product could be the cause of updates to this manual, therefore the
manufacturer reserves the right to modify it, in whole or in part, without warning obligation. The
manufacturer also will not accept any liability for damage caused to people or things close to it in
the following cases:
• Misuse of the product and its accessories;
• Improper assembly and installation;
• Unauthorised, modifcation or interventions;
• Using not original spare parts;
• Failure to comply with the rules established by this manual.
Keep the manual with the utmost care in a dry place and protected, always available for future
reference. The manual should be kept as long as the product is in operating life. In case of user's
manual loss or damage, ask the manufacturer for a new one.

1.5.1 MAINTENANCE AND WARRANTY

The product of this manual does not require any maintenance from the user besides the usual
cleaning of the screen, which must be performed with a specifi c non-aggressive, alcohol-free
cleaning agent, sprayed on a soft cloth. For product repair, the user shall contact the manufactur.
1.6 REGOLAMENTO CE
Our products are designed in accordance with the requirements of the Electrical Safety EU di-
rective. 2014/35/UE – LVD LVD (Essential Health and Safety Requirement of the Low Voltage
Directive) And Electromagnetic Compatibility OF THE EU directive2014/30/UE – EMC (Electro-
magnetic Compatibility Directive) in order to affi x the CE mark, in relation to standards:
• CEI EN 60950-1 Electrical Safety
• CEI EN 55024 – CEI EN 55022 Electromagnetic Compatibility

1.7 PACKAGING

The PACKAGING is composed by a cardboard box with inside expanded material shells that
guarantee safety during the shipment by carriers.
• TFT;
• Documentation (This manual);
• Connection cables.
Never open the equipment. For safety reasons, only qualifi ed service
personnel should open the equipment.
Do not use sharp or scratching objects or corrosive substances that
can damage the active surface of the touch screen.
MNL214.1
5