Advertisement
SAFETY INSTRUCTIONS
4
• Failure to carefully read and follow all instructions in the manual can
result in equipment malfunction, property damage, personal injury
and/or death.
• Compliance with national gas regulations shall be observed.
• Ducts connected to an appliance shall not contain an ignition source.
(For R32)
Installation
• Always perform grounding.
• Don't use a power cord, a plug or a loose socket which is damaged.
• For installation of the product, always contact the service center or a
professional installation agency.
• Securely attach the electrical part cover of the indoor unit and the
service panel of the outdoor unit are not attached securely, it could
result in a fire or electric shock due to dust, water, etc.
• Always install an air leakage breaker and a dedicated switching
board.
• Do not keep or use flammable gases or combustibles near the air
conditioner.
• Ensure that an installation frame of the outdoor unit is not damaged
due to use for a long time.
• Do not disassemble or repair the product randomly.
• Do not install the product at a place that there is concern of falling
down.
• Use caution when unpacking and installing.
• Do not turn on the breaker or power under condition that front panel,
cabinet, top cover, control box cover are removed or opened.
• The appliance shall be stored in a room without continuously
operating open flames (for example an operating gas appliance) and
ignition sources (for example an operating electric heater).
Operation
• Do not share the outlet with other appliances.
Advertisement
