Safety - Husqvarna ST 424T Operator's Manual

(Fig. 3) Warning.
(Fig. 4)
Read the operator's manual.
(Fig. 5)
Engine on.
(Fig. 6) Start the engine.
(Fig. 7) Engine off.
(Fig. 8) Boost.
(Fig. 9)
Fast.
(Fig. 10)
Slow.
(Fig. 11) Oil change reminder.
(Fig. 12) Heated handles.
(Fig. 13)
Remove key before maintenance.
(Fig. 14)
Remove spark plug cable before
maintenance.
(Fig. 15) Hot surface.
(Fig. 16)
Risk of fire.
(Fig. 17)
Beware of thrown objects.
(Fig. 18) Keep distance to bystanders.
(Fig. 19) Do not breathe in exhaust fumes.
(Fig. 20) Move slowly rearward.
(Fig. 21)
Risk of falling.
(Fig. 22)
No operation on slopes more than 20
degrees.
Safety definitions
The definitions below give the level of severity for each
signal word.
WARNING:
CAUTION:
12
Injury to persons.
Damage to the product.
(Fig. 23) This product is in accordance with
applicable EC directives.
(Fig. 24)
This product conforms to applicable UK
regulations.
(Fig. 25) Steer left.
(Fig. 26)
Steer right.
(Fig. 27)
Blower on.
(Fig. 28) Traction drive on.
(Fig. 29) Ear protection recommended.
(Fig. 30)
Wear protection gloves.
(Fig. 50)
(Fig. 51)
(Fig. 52)
(Fig. 53)
Product damage
We are not responsible for damages to our product if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

Note:
This information makes the product easier to
use.
General safety instructions
• Use the product correctly. Injury or death is a
possible result of incorrect use. Only use the product
for the tasks found in this manual. Do not use the
product for other tasks.
• Obey the instructions in this manual. Obey the safety
symbols and the safety instructions. If the operator
Change auger bucket
height.
Rotate left/rotate right.
Forward/reverse.
Up/down.
876 - 019 - 05.10.2023