Figure 59. Installing the Wi-Fi card
Figure 60. Connecting the Wi-Fi antenna cables
Figure 61. Installing the Wi-Fi card shield
6. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 58.
Replacing the serial connector module
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer stand. See "Replacing the computer stand" on page 16.
2. Remove the computer cover. See "Removing the computer cover" on page 18.
3. Remove the side I/O bezel. See "Replacing the side I/O bezel" on page 24.
4. Remove the system board shield. See "Replacing the system board shield" on page 25.
5. Replace the serial connector module.
.
Chapter 4
Replacing hardware
39