To create a new Telememo record
New Data Screen
EN-18
1. In the Telememo Mode, press B and D at the same
time to display the new data screen.
•
The new data screen shows ———, which indicates
that there is no text in the name field.
•
If the new data screen does not appear, it means that
memory is full. To store another record, you will first
have to delete some of the records stored in memory.
2. Hold down A until the flashing cursor ( — ) appears in
the name field of the display, which indicates the setting
screen.
3. Use B and D to change the character at the cursor
position in the name field. The character changes in the
following sequence.