Deleting A Particular Record; Deleting All Records; Timer; Setting The Timer Start Time - Casio 5554 Operation Manual

Deleting a Particular Record

Use the procedure below to delete a selected
data record.
1.
Enter the Recall Mode.
Navigating Between Modes
l
2.
Hold down (A) for about two seconds.
Record number
Holding down (A) switches the record
●
number.
3.
Hold down (B) and (D) for about two
seconds.
Release the button as soon as [CLR]
appears. This deletes the displayed data.
Note
You cannot delete data while an
●
elapsed time measurement operation
is in progress.
Operation Guide 5554

Deleting All Records

You can use the procedure below to clear all
measurement data stored in watch memory.
1.
Enter the Recall Mode.
Navigating Between Modes
l
2.
Hold down (B) and (D) for about five
seconds.
[CLR] flashes and then stops flashing to
indicate that the displayed data record
was deleted. Keep the buttons depressed
until [ALL CLR] flashes for about 1.5
seconds and then stops flashing, which
indicates all data was deleted.
Note
You cannot delete data while an
●
elapsed time measurement operation
is in progress.

Timer

The timer counts down from a start time
specified by you. The watch beeps every
second for the last five seconds of the
countdown.
The beeper is muted in the cases described
●
below.
When battery power is low.
ー
Getting Ready
Enter the Timer Mode.
Navigating Between Modes
l

Setting the Timer Start Time

The start time can be set in 1-second units up
to 60 minutes.
1.
Hold down (A) for about two seconds.
2.
Use (D) and (B) to specify the number of
timer repeats.
Number of repeats
3.
Press (C).
4.
Use (D) and (B) to display [1].
5.
Press (C).
This causes the minutes digits to flash.
6.
Use (D) and (B) to change the timer
minutes setting.
Minutes
7.
Press (C).
This causes the seconds digits to flash.
8.
Use (D) and (B) to change the start time
seconds setting.
Seconds
9.
Press (A) to exit the setting screen.
14