Error Code / Fault Display / Signal - Bosch SMS46MI05E User Manual

en Troubleshooting
Fault
Appliance door does not
open at the end of the Eco
50° programme.
Appliance door automatic-
ally opens too wide at the
end of the Eco 50° pro-
gramme.

Error code / Fault display / Signal

Fault
E:12 lights up.
E:14 lights up.
E:15 lights up.
E:16 lights up.
E:18 or indicator for water
supply lights up.
46
Cause
The safety device will switch
Eco drying off.
Door is not correctly adjus-
ted.
Wrong screws used to ad-
just the door gap.
Cause
Heating element is furred
up.
Water protection system is
activated.
Water protection system is
activated.
Water is continuously run-
ning into the appliance.
Supply hose is kinked.
Water tap is turned off.
Water tap is jammed or
furred up.
troubleshooting
The screws are included in the
scope of supply.
If the screws used here are too
long, this may deactivate Eco dry-
ing.
Call Customer Service.
▶
→ Page 59
Adjust the appliance door as de-
▶
scribed in the installation instruc-
tions.
The door gap must be at least
70 mm - 100 mm.
Use size 4X30 screws to adjust the
▶
door gap.
The screws are included in the
scope of supply.
If the screws used here are too
long, this may deactivate Eco dry-
ing.
troubleshooting
Descale the appliance.
1.
Operate the appliance with the Wa-
2.
ter softening system.
Turn off the water tap.
1.
Call Customer Service
2.
→ Page 59.
Turn off the water tap.
1.
Call Customer Service
2.
→ Page 59.
Turn off the water tap.
1.
Call Customer Service
2.
→ Page 59.
Install the supply hose without
▶
kinks.
Turn on the water tap.
▶
Turn on the water tap.
▶