Daikin CTKC25WVMG Operation Manual page 8

Read Before Operation
Names of Parts
Wireless LAN connecting adapter
ATTENTION
• When the Wireless LAN connecting adapter is operated, the RUN lamp may light through the front panel. If you find the lamp disturbing,
the lamp can be disabled via the mobile application
RUN lamp [1] (orange) lights
when connecting to a router
(Wireless LAN access point).
SETUP button
Use when connecting to a router
(Wireless LAN access point).
[1] The RUN lamp LED can be disabled via the mobile application
• Make sure the controller is connected to the Wireless LAN adapter and RUN lamp is lit.
To turn off the RUN lamp via the mobile application.
1) Open "DAIKIN Mobile Controller" in your smartphone or tablet.
2) Select "Setting" or icon "
3) Select "Adapter LEDs" and turn it off.
• The RUN lamp turns off.
• Mobile controller continues operating.
„ Specifications
Frequency range
Radio protocol
RF channel
Power supply
RF channel: Radio frequency channel
„ Configuration
• The user is responsible for providing the following items before using this product:
„ Smartphone or tablet PC (Supported OS: Android 2.3.3 or later; iOS 5.0 or later.)
„ Internet line and communicating device (Modem/router or similar device)
„ Wireless LAN access point
„ Application name: [DAIKIN Mobile Controller] (free)
For details on the installation method for the DAIKIN Mobile Controller application, please see
NOTE
Notes on the Wireless LAN connecting adapter
• Do not use this product near a microwave oven. (This can affect Wireless LAN communications.)
• For the latest details about installation of the Wireless LAN connecting adapter and applicable units, refer to the web site
http://www.daikinthai.com/product/dmobile
7
[1] .
* No operation for BRP072C42 model.
".
2400 MHz−2483.5 MHz
IEEE 802.11b/g/n
1−13
DC 14 V / 100 mA
.
AP lamp*
MODE button*
POWER button*
(on/off power by press
POWER button 3 seconds)
Page 18