Nat - Genie WONVR14P5 Quick Start Manual

8.0 NAT

You can enable the NAT function in the interface or set it in the network configuration after
exiting the wizard. You can scan the QR code through the mobile surveillance APP available
for iOS or Android to easily view your cameras.
Web Browser Access Through NAT Function
G to Start → Settings → Network → NAT tab. Enable NAT and select the NAT Server Address.
Click "Apply" to save the parameters.
Enter www.autonat.com in the address bar of your browser and then press enter to go to
the following interface. If you are the first time to access the NAT, you shall download and
install the plug-in according to the popup tips. After that, re-open your web browser and
enter the above-mentioned address. Then the login box will appear. Enter the device serial
number, username and password.
Device Serial Number:
Click on the menu bar at the bottom of the live interface to check the serial number or
go to Start → Settings → Network → Network Status to check the serial number of the NVR).
Username:
The username of the NVR. The default username is admin.
Password:
The password of the NVR. The password is set by yourself when you configure the wizard
for the first time.
12