Panasonic LUMIX DCG100VGNK Operating Instructions Manual page 420

14. Wi-Fi/Bluetooth
™ ™
[From List]
Searches for a wireless access point to use, and connects to this.
• Confirm the encryption key of the wireless access point.
Select the wireless access point you
are connecting to.
• Press [DISP.] to run a wireless access point
search again.
• If no wireless access point is found, refer to
"Connecting by Manual Input" on page 420.
(If network authentication is encrypted)
Enter the encryption key.
™ ™
Connecting by Manual Input
• Check the SSID, network authentication, encryption, and encryption key of
the wireless access point you are using.
In the screen in Step
Enter the SSID of the wireless access point you are connecting to, and
then select [Set].
Select the network authentication.
[WPA2-PSK]
[WPA2/WPA-PSK]
[No Encryption]
(When other than [No Encryption] is selected)
Enter the encryption key and then select [Set].
420
of "[From List]", select [Manual Input]. (420)
Supported encryption: [TKIP], [AES]
—