•
cover
5.
Follow the procedure in
Removing the optical drive
1.
Follow the procedure in
2.
Remove the:
•
cover
•
bezel
3.
To remove the optical drive:
a. Open the
front bezel
b. Disconnect the data cable and power cable from the connectors on the optical drive [1, 2].
c. Close the front bezel door [3].
d. Press the blue release tab [4] and slide the optical drive out of the computer [5].
Installing the optical drive
1.
Insert the optical drive into the optical drive bay until it clicks into place.
2.
Open the
front bezel
3.
Connect the data cable and power cable to the connectors on the optical drive.
4.
Close the front bezel door.
5.
Install the:
•
bezel
•
cover
6.
Follow the procedure in
12
After Working Inside Your
Before Working Inside Your
door.
door.
After Working Inside Your
Computer.
Computer.
Computer.