NAPCO Security Technologies, Inc.
333 Bayview Avenue, Amityville, New York 11701
Tech.NapcoSecurity.com
Publicly traded on NASDAQ
Symbol: NSSC
Getting Started
Thank you for your purchase of the NAPCO Prima security system. Please follow the quick guide below
to get your system up and running. For more details, scan the QR code for full Prima manual.
1
Wire the
Power Supply
Connect red to (+)
Connect black to (−)
3
Install Cover
Insert tabs at bottom and press to snap clips in place.
© NAPCO 2023
2
Connect Power Supply
Insert power supply into DC socket shown (arrow).
BATTERY
SIM
RESET
DC
DC
+
4
Install Tabletop Stand
Slide tabs in as shown (no "snap").
5
Setup Wizard
Apply power and the Setup Wizard appears.
WI2610DLF 8/23
Download the
Prima Manual
7
Select your Wi-Fi Network
Download the
Prima App
9
Create a Panel Master Passcode
It must be 4-digits.
11
Install Your First Sensor
Select the sensor device type.
6
Tap Start
8
Type your Password
(Text is cAsE SeNsiTiVe).
10
Select Panel installation Location
12
Pair the Sensor to the Panel
Follow the on-screen instructions.
Next: Continue following the system prompts to complete your installation.
For more information, scan the QR code to download the User Guide or
contact your alarm dealer for technical service.