TP-Link TD-W8920G User Manual page 41

1. Click the Add button (pop-up Figure 4-19), and then you will set the new Port Triggering in
the next screen (shown in Figure 4-20).
2. Select the application from the drop-down list. If the list does not have the application that
you want, select the Custom application radio-button, and type the name of the custom
application in the text box.
3. Enter the Trigger Port Start, Trigger Port End, Open Port Start and Open Port End in the
table, and then select the Trigger protocol and Open protocol, TCP, UDP or All.
4. Click the Save/Apply button to enable the settings.
Note:
If you select the application from the drop-down list, the External Port Start, External Port End,
Internal Port Start, Internal Port End and the Protocol will be added in the table automatically.
4.4.3.3. DMZ Host
Choose "Advanced Setup" "NAT" "DMZ Host", you can set up DMZ Host on the screen
(shown in Figure 4-21).
The DMZ host feature can make a local host be exposed to the Internet for a special-purpose
service, such as online gaming or video conferencing.
TD-W8920G 108M Wireless ADSL2+ Router User Guide
Figure 4-20
34