Show Bridge Address-Table Static - TP-Link TL-SG3109 Cli Reference Manual

show bridge address-table static

The show bridge address-table static Privileged EXEC mode command displays statically created entries in the
bridge-forwarding database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface | port-channel port-channel-number]
Parameters
•
vlan — Specifies a valid VLAN, such as VLAN 1.
•
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
Console# show bridge address-table static
Aging time is 300 sec
vlan mac address
---- -----------------
1 00:60:70:4C:73:FF
1 00:60.70.8C.73:FF
200 00:10:0D:48:37:FF
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 40
port type
---- -----------------
8 Permanent
8 delete-on-timeout
9 delete-on-reset