Table of Contents
Advertisement
If the result displayed is similar to that shown in figure below, it means that your PC has not
connected to the Router.
Please check it following these steps:
1.
If the connection between your PC and the Router is correct?
Note:
The 1/2/3/4 LEDs of LAN port which you link to on the Router and LEDs on your PC's adapter
should be lit.
2.
If the TCP/IP configuration for your PC is correct?
Note:
If the Router's IP address is 192.168.1.1, your PC's IP address must be within the range of
192.168.1.2 ~ 192.168.1.254, the gateway must be 192.168.1.1.
For more details of configuring the Router, please refer to
Chapter 5. Basic Router Configuration
This User Guide recommends using the "Quick Installation Guide" for first-time installation of the
TD-W8910G 54M Wireless ADSL2+ Router. For advanced users, if you want to know more about
the TD-W8910G and make use of its functions adequately, you need to read this chapter and
configure the Router's advanced settings though the Web-based Utility.
This chapter will describe each web page on the Utility and each page's key functions. The Utility
can be accessed via your web browser though the use of a computer connected to the Router.
You may configure the TD-W8910G 54M Wireless ADSL2+ Router's settings though the
Web–based Utility.
TD-W8900GB
54M Wireless ADSL2+ Router User Guide
Figure 4-13
Figure 4-14
16
C hapter 5
1
Advertisement
Table of Contents
