Table of Contents
Advertisement
Available languages
Available languages
button on the device
correctly installed on the window. Select the cleaning mode.
AUTOMATIC MODE
Press the button
mode will start.
MOTION MODES
•
"Z" shaped cleaning mode is suitable for wide windows. In this mode, the automatic water spray
will be functional.
•
"N" shaped cleaning mode is suitable for tall windows. In this mode, the automatic water spray
will be functional.
•
"N/Z" shaped cleaning mode is a combined mode suitable for all windows. "N/Z" cleaning mode,
it will start in "N" mode first and then continue in "Z" mode. The water spray will work the same
as in the individual modes.
•
For manual control, place the device on the window with the TESLA logo on the right. Then
control its movement with the directional arrows 1, 2 or 3 on the remote control.
PAUSE CLEANING
Press the button
power failure, the device's operation indicator will flash red, the device will stop and enter emergency
mode. Turn off the device or restore power.
SWITCHING OFF
The device will return to the starting point after cleaning.
Press and hold the button for a while
possible to remove it from the window.
Remove the safety cable >> Switch off the device from the mains >> Pour the remaining water out of
the device.
CONTROLLING THE ROBOTIC WINDOW CLEANER USING YOUR PHONE
•
Turn on Bluetooth and Wi-Fi on your phone.
•
Install the app on your phone to control the robotic window cleaner and follow the wizard to
connect.
for a few seconds. If the LED starts to glow permanently blue, the device is
on the device or press the button on the remote control
on the device or press the button on the remote control
ANDROID
Search "Smart Life" app on Google Play
. The device stops creating negative pressure and it is
and the "N/Z"
. In the event of a
Advertisement
Table of Contents
