Table of Contents
Advertisement
Connecting the
TI GRAPH LINK
Cable
Installing the
TI GRAPH LINK
Software
Note: If you
download
TI GRAPH LINK
from the TI web
site (page 3), see
the web for
installation
instructions.
Starting and
Exiting
TI GRAPH LINK
ENG-4
TI GRAPH LINK 2 for Macintosh
The TI GRAPH LINK hardware connects to the Macintosh
via the modem port or printer port of the computer, and to
the input/output port of the calculator.
1. Connect one end of the 8-pin to 25-pin adapter cable to
the Macintosh modem port or printer port on the rear
of the unit.
2. Connect the gray TI GRAPH LINK cable to the 25-pin
end of the 8-pin to 25-pin adapter cable.
3. Insert the other end of the TI GRAPH LINK cable into
the port on the calculator.
Important: The TI GRAPH LINK cable must be
connected and the calculator turned on before getting
screens, and sending and receiving files. Push in all
connectors firmly.
If the software is on:
3½-inch diskette
You may want to copy
the diskette and use
the copy.
CD-ROM
All necessary files are installed on your hard drive,
including custom fonts used by the application.
On the Macintosh, open the
double-click the icon for the application. The
menu bar is displayed.
LINK
To close
TI GRAPH LINK
Open the
File
– or –
Press
+
on the Macintosh keyboard.
Q
Then:
1. Insert the diskette into the
Macintosh.
2. Open the diskette and double-
click the
If your Macintosh is set for
Autostart, the installation
program starts when you insert
the CD.
Otherwise, open the CD and open
the folder for
Select the appropriate calculator
and language, and then
click the
TI GRAPH LINK
:
menu, and then click
Installer
icon.
TI GRAPH LINK.
double-
Installer
icon.
folder and
TI GRAPH
Quit
.
Advertisement
Table of Contents
