Advertisement
ASSEMBLY AND SET-UP
Collar Clamp
Required Tool: 5 mm Allen Wrench (included)
Using a 5 mm Allen wrench, check that the collar clamp bolt is tightened securely. This item is tightened and quality
inspected at the factory, but there is a slight chance that the effects of shipping or handling may have caused the bolt
to loosen.
3
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
1
4
2
4
WARNING: Failure to
properly install and tighten the collar
clamp may cause the rider to lose
control and fall. If you are having
difficulty understanding these
instructions, please contact Razor
Customer Service for assistance.
Advertisement
